Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlamp on Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

Removing the headlamps on a Ford Mondeo is a fairly simple job, usually done when replacing the entire headlamp unit or simply to change the bulbs. First, open the bonnet and locate the bracket that secures the top of the headlamp to the body frame; this will be fastened with a screw that needs to be undone.

Once the first screw is removed, there will be a second one on the inner side of the headlamp that secures it to the grille, and this also needs to be taken out. To simplify the extraction of the headlamp, it is advisable to remove a third screw that secures the outer side of the grille to the car frame, allowing the grille to flex and providing more space to remove the headlamp.

After removing all the screws, simply pull the headlamp forward to extract it from its housing; it will still be connected to the car via the power connector, which can be disconnected if replacing the entire headlamp or left in place if only accessing the cover that houses the bulb holders and bulbs.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Ford Mondeo / Fusion (2007-2014 / MK 3) This brief guide provides instructions on how to remove and replace the front headlight on a Ford Mondeo in simple steps. First, open the car's bonne…
Ford Mondeo / Fusion (2007-2014 / MK 3) How do you remove the bulbs from the front headlamp of a Ford Mondeo? Let's look at the disassembly. Release the front bonnet by pulling the lever lo…
Ford Mondeo / Fusion (2007-2014 / MK 3) This guide shows how to remove the front headlamp of a Ford Mondeo Mk4. Using a 7 mm flathead screwdriver, remove the two screws securing the headlam…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos