Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Front Headlamp

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

This guide shows how to remove the front headlamp of a Ford Mondeo Mk4. Using a 7 mm flathead screwdriver, remove the two screws securing the headlamp inside the engine bay. If desired, you can also remove the small clip shown in the video by gently prying it with a flathead screwdriver.

Now push the headlamp towards you and outwards, then pull it out. Carefully reposition the headlamp in its housing and ensure its edge is in the correct position.

To remove and refit the other headlamp, follow the same procedures. Finally, remember to secure the headlamps with the screws located inside the engine bay.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Front Headlight on a Ford Mondeo
How to Remove and Replace the Front Headlight on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) This brief guide provides instructions on how to remove and replace the front headlight on a Ford Mondeo in simple steps. First, open the car's bonne…
Replacing the Front Headlamp Bulb
Replacing the Front Headlamp Bulb
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the front headlamp bulb, you must first remove the headlamp itself, starting with the removal of the front grille. Once removed, you can e…
How to Remove the Front Headlamp on Ford Mondeo
How to Remove the Front Headlamp on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Removing the headlamps on a Ford Mondeo is a fairly simple job, usually done when replacing the entire headlamp unit or simply to change the bulbs. F…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos