Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Fog Light Bulb on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Headlight bulb

If you need to replace the front fog light bulb on this vehicle, the discussion below provides the details and the procedure to follow for a proper replacement. First, remove the retaining clips from the inner wing located near the fog light. Then unclip the bumper fixings on the side to move it away from the bodywork. Underneath, you will find the screws securing the light, and you can then proceed to remove the rear cover and unclip the bulb retaining clip. Remove the bulb and replace it with the new one, then reassemble all components in reverse order.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fog Lights from a Ford Mondeo
How to Remove the Fog Lights from a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) Are your fog light bulbs not working? Follow these steps to remove a fog light from a Ford Mondeo. Lift the car on a column lift and remove the locki…
How to Replace the Headlamp Bulb on the Ford Mondeo
How to Replace the Headlamp Bulb on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In today's video, we will see how to replace the headlamp bulb on the Ford Mondeo. First, it is recommended to proceed with the engine cold to avoid …
How to Replace the Indicator Bulb on Ford Mondeo
How to Replace the Indicator Bulb on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the front headlight and indicator bulb is a simple and quick task that can be done independently on a Ford Mondeo. To replace it, open the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos