Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Fog lights

In this video, we will see how to replace the fog light bulb on a Ford Mondeo. Start by removing the plastic grille frame around the side fog light located in the bumper. After removing the fake grille, use the appropriate screwdriver or socket wrench to unscrew the securing screws of the fog light, then remove it from the bumper. Once the fog light is extracted, replace it with a new one (if damaged), and replace the damaged bulb (same size and voltage). Refit the fog light into the car's bumper with the attached cover. Test the lights to ensure they are functioning correctly.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on the Ford Mondeo
How to Replace the Headlamp Bulb on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In today's video, we will see how to replace the headlamp bulb on the Ford Mondeo. First, it is recommended to proceed with the engine cold to avoid …
How to replace the front headlight bulb of the Ford Mondeo 5
How to replace the front headlight bulb of the Ford Mondeo 5
Ford Mondeo / Fusion (2022-2026 / MK 5) In the following guide, we will explain step by step how to correctly replace the headlight bulb of your Ford Mondeo Mk5. First, make sure you have p…
How to Replace Front Bulbs on Ford Mondeo
How to Replace Front Bulbs on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How do you remove the bulbs from the front headlamp of a Ford Mondeo? Let's look at the disassembly. Release the front bonnet by pulling the lever lo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos