Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Lights from a Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Headlight

Are your fog light bulbs not working? Follow these steps to remove a fog light from a Ford Mondeo. Lift the car on a column lift and remove the locking bolts located under the plastic splash guard. Use a plastic spatula to pry the fog light out (lever between the fog light and the edge of the bumper) and disconnect the power connectors once it is out. Replace the damaged bulbs with new ones (same type and voltage) and refit the fog light into the bumper housing along with the power cable. Finally, test the lights to ensure they work correctly.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fog Light Bulb on a Ford Mondeo
How to Change the Fog Light Bulb on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) If you need to replace the front fog light bulb on this vehicle, the discussion below provides the details and the procedure to follow for a proper r…
Removing Bumper of a Ford Mondeo
Removing Bumper of a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Need to remove the front bumper of the Ford Mondeo? Here's how to do it from the front of the car. Lift the bonnet and secure it. Remove the retainin…
Removing the Front Bumper on the Ford Mondeo
Removing the Front Bumper on the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Removing the front bumper on the Ford Mondeo? Remove the front headlights and the central grille before taking off the front bumper. After removing t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos