Do it yourself
Frequently asked questions about cars and motorcycles

Removing Bumper of a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Front bumper

Need to remove the front bumper of the Ford Mondeo? Here's how to do it from the front of the car. Lift the bonnet and secure it. Remove the retaining screws above the bumper, unscrew the screws located between the bumper and the wing (remove the clips located at the bottom of the bumper). Disconnect the fog light connectors. Remove the bumper from the body of the vehicle by hand. To proceed with the installation, align the bumper on the body of the vehicle, reconnect the fog lights, and tighten all screws around the wheel arch liners and along the perimeter.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Mondeo / Fusion (2007-2014 / MK 3) Below are the instructions for removing and replacing the front bumper of the Ford Mondeo. First, open the bonnet of the vehicle and start unscrewing…
Ford Mondeo / Fusion (2007-2014 / MK 3) Removing the front bumper on the Ford Mondeo? Remove the front headlights and the central grille before taking off the front bumper. After removing t…
Ford Mondeo / Fusion (2014-2021 / MK 4) To replace the front grille of the Ford Mondeo, first open the bonnet to access the screws that secure the bumper from the top. After loosening the u…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos