Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on the Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Front bumper

Removing the front bumper on the Ford Mondeo? Remove the front headlights and the central grille before taking off the front bumper. After removing the grille, unscrew the securing screws located at the top of the bumper. Unscrew and remove the screws located in the wheel arch liners (remove the clips located at the bottom of the bumper). Pull the bumper away from the bodywork (disconnect the electrical connectors). Carry out the necessary maintenance or fit the new bumper with all attached parts. Secure all components with the securing screws, the headlights, and the central grille.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of the Ford Mondeo
Removing the Front Bumper of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Below are the instructions for removing and replacing the front bumper of the Ford Mondeo. First, open the bonnet of the vehicle and start unscrewing…
Removing the Rear Bumper on Ford Mondeo
Removing the Rear Bumper on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the damaged rear bumper on a Ford Mondeo. Follow the guide to remove it. Open and lift the tailgate, unscrew the securing screws located at…
Removing Bumper of a Ford Mondeo
Removing Bumper of a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Need to remove the front bumper of the Ford Mondeo? Here's how to do it from the front of the car. Lift the bonnet and secure it. Remove the retainin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos