Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light of a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Interior dome light bulb

See other generations:
Video tutorial

Is the interior light bulb blown? Let's change it. Use a screwdriver to lever between the light and the plastic in the roof panel (be careful not to break anything), pull the light out of the panel and disconnect the power connector. Replace the damaged bulb with a new one (same size and voltage).

Refit the light into its housing (push the light with your hands until the clips lock into the side plastic). Test the correct operation of the bulbs in the light.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Light on a Ford Focus
How to Remove the Interior Light on a Ford Focus
Ford Focus (1998-2004 / MK 1) In this video, learn how to change the bulbs in the interior light of a Ford Focus. Use a screwdriver to pry between the interior light and the headl…
Removing Rear Interior Light on Ford Focus
Removing Rear Interior Light on Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the rear interior light on a Ford Focus Mk3 is very straightforward, but it is actually a simple task on all car models. For this operation…
How to replace the bulb of the interior light of the Ford Focus
How to replace the bulb of the interior light of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show us how to disassemble and replace the bulb of the interior light fixture of the Ford Focus. First of all, we get on boa…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos