Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Reset tire pressure warning light on a Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: -board computer
Operation: Reset tire pressure warning light on a Ford Focus

The first thing to do, if you notice the tire pressure light on the dashboard of your car, the one in the shape of a tire section with an exclamation point, is to check the tire pressure. After doing this, however, the light will not turn off automatically, but we will have to do it manually, and this is where we come to your aid. Insert the key and make two clicks, without starting the engine, then you will have to quickly click the button with the four arrows 6 times. The light will turn off automatically. Now all that remains is to turn off the ignition and turn it back on and then start the engine.


Posted on 10 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2018-2025 - Why is the display of the Ford Focus not working anymore? Read Answer
    • Focus 1998-2004 - How to access the hidden menu of the Focus? Read Answer
    • Focus 2011-2018 - Why doesn't the Ford Focus screen turn off? Read Answer
    • Focus 2011-2018 - What does the Ford Focus engine light indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos