Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

When the TPMS light illuminates on the Ford Focus, it indicates that you need to adjust the tyre pressure and then reset the light. To reset the light, turn on the ignition of the vehicle and press the arrow button to access the vehicle menu.

Once inside, select "Driver" from the menu and then choose "Tire monitor". This will allow you to press the OK button and reset the TPMS light. If the light does not turn off, you may need to check the status of the tyre pressure sensor.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Ford Focus
How to Reset the TPMS Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) To reset the TPMS light on a Ford Focus, ensure that all tyres are inflated to the correct pressure. Turn on the ignition without starting the engine…
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Ford Focus
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) Below are the steps to reset the tyre pressure monitoring system (TPMS) light on a Ford Focus; before resetting the TPMS sensors, ensure all four tyr…
How to Reset the TPMS Light on a Ford Focus
How to Reset the TPMS Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) To reset the TPMS light on a Ford Focus, first bring all tyres to the correct pressure indicated on the label on the door pillar or in the manual. In…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos