Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part:

Below are the steps to reset the tyre pressure monitoring system (TPMS) light on a Ford Focus; before resetting the TPMS sensors, ensure all four tyres are at the correct operating pressure. Then, get into the vehicle and turn on the ignition; next, navigate to the onboard computer settings using the steering wheel controls, scrolling through the options until you reach the tyre pressure section, as shown in the video. At this point, press the "ok" button to confirm and reset the TPMS sensors!

Posted on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on the Ford Focus
How to Reset the TPMS Light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today, we will see how to reset the tyre pressure monitoring system (TPMS) light on a Ford Focus vehicle. Before resetting the light, it is important…
How to Reset the TPMS on the Ford Focus MK3
How to Reset the TPMS on the Ford Focus MK3
Ford Focus (2011-2018 / MK 3) Here’s how to reset the tyre pressure monitoring system (TPMS) on the Ford Focus MK3: this method is valid if the light comes on only for low pressur…
How to Reset the Tyre Pressure Light on a Ford Focus
How to Reset the Tyre Pressure Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) In this short video tutorial, you can see how to reset the tyre pressure light, or TPMS light, on a third-generation Ford Focus, produced from 2011 t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos