Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset of the tire pressure warning light on the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part:

Let's discover the steps that will allow us to reset the tire pressure warning light on the Ford Focus; before performing the reset of the TPMS sensors, it is necessary that all four tires are at the operating pressure. So, we get inside the vehicle and start by turning on the instrument panel; then we use the arrow buttons and the menu located to the left of the steering wheel to access the settings, then go to the tire pressure option, as shown in the video. All that's left is to confirm and perform the reset of the TPMS sensors!

Posted on 21 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Ford Focus 4
How to Reset the Tyre Pressure Light on the Ford Focus 4
Ford Focus (2018-2025 / MK 4) Watch this video to see how to reset the tyre pressure light on the fourth generation Ford Focus in simple steps; before resetting the light, ensure …
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Ford Focus
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) Below are the steps to reset the tyre pressure monitoring system (TPMS) light on a Ford Focus; before resetting the TPMS sensors, ensure all four tyr…
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos