Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disassemble and Remove the Left Front Door Handle on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Handle

See other generations:
Video tutorial

This video is a tutorial on how to disassemble and remove the left front door handle on a Ford Fiesta. First, you will need to open your door and, with the help of a thin tool, remove the rubber cover that hides the inner end of the handle.

Next, using a T20 Torx key, you can easily unscrew the handle support and pull it out piece by piece, being careful not to damage any components. In just a few simple steps, you will have disassembled and removed the left front door handle of your Ford Fiesta, which you can reassemble by following the same process in reverse.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Left Front Door Handle on a Ford Fiesta
How to Replace the Left Front Door Handle on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How do you replace the external handle on a Fiesta? Open the door and see how to disassemble it. Undo the screw located on the side of the door (as s…
Replacing the External Handle of the Front Door on the Ford Fiesta
Replacing the External Handle of the Front Door on the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) These brief and simple steps will guide you through the process of removing and replacing the external handle of the front door on the Ford Fiesta. F…
How to Remove the Left Rear Door Lock on a Ford Fiesta
How to Remove the Left Rear Door Lock on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to remove the left rear door lock on a Ford Fiesta? Disconnect the battery terminals located in the engine bay; use a screwdriver to remove the s…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos