Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

See other generations:
Video tutorial

Lift the wiper arm off the windscreen. Press the designated hook and simultaneously slide off the blade.

Fit the new blade simply by inserting it into place, then return the wiper arm to the windscreen gently. During the installation of the new part, avoid touching the rubber edge of the blade to prevent damage.

Also, ensure that the rubber strip you purchased is the correct length for the glass. To replace the rear wiper blade, the procedure is exactly the same.

Good luck!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Remove the Windscreen Wiper Motor on a Ford Fiesta 6
How to Remove the Windscreen Wiper Motor on a Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video, see how to remove and replace the windscreen wiper motor on a sixth generation Ford Fiesta by following these simple and quick steps. …
How to Replace the Wiper Blades on a Ford Fiesta
How to Replace the Wiper Blades on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will see how to replace the wiper blades on a Ford Fiesta by following a few simple steps: first, purchase new wiper blad…
How to Use the Wipers on a Ford Fiesta?
How to Use the Wipers on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To use the wipers on a Ford Fiesta, operate the lever located to the right of the steering wheel, which also has the wiper symbols. To simply activat…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos