Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Fiesta
  6. : How do you use the Ford Fiesta wipers?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Windscreen wipers
Operation: How do you use the Ford Fiesta wipers?

To be able to use the Ford Fiesta windscreen wipers, you need to operate the lever located to the right of the steering wheel and on which the symbols of the windscreen wipers are also shown: to simply activate the blades, just lift the lever upwards. Each click of the lever will correspond to a different speed of the brushes; on the other hand, to make sure that the windscreen wiper fluid also comes out, you will have to pull the stalk towards you. In this way, the liquid will come out which can be used to clean the windscreen by activating the brushes with the same lever.


Posted on 22 December 2022 by ScegliAuto



How to activate the wipers in the Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In today's video tutorial we will see all the secrets of the Ford Fiesta wipers. Press the button on the right lever to operate the window washers. I
Which is the fuse for the windshield wipers in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) If the windshield wipers of our Ford Fiesta have suddenly stopped working, the first thing we can do is check the condition of the corresponding fuse
How to remove the Ford Fiesta wiper motor 6
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Let's see in this video how to remove and replace the wiper motor of the Ford Fiesta sixth series, following these simple and quick steps. First we o

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to replace the wiper blades in the Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - Why does the Ford Fiesta window lifter not work? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos