Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Boot Struts on a Ford Focus MK1

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Body

See other generations:
Video tutorial

In this video, see how to remove and replace the hydraulic struts of the rear boot on a first-generation Ford Focus in simple steps. First, open the boot and use a thin, pointed tool like a flat screwdriver to lever the strut clips on both sides, as shown in the video; then you will be able to remove the old strut and replace it with the new one. Ensure the strut is securely clipped into place before performing the same operation on the other hydraulic strut!


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) Open the boot of the car and observe the structure of the hydraulic struts that hold it open. Use a small flat screwdriver or any sharp tool to detac…
Ford Focus (1998-2004 / MK 1) How do you remove the tailgate gas struts on a Ford Focus? Follow this video to replace the struts on a tailgate: Lift the tailgate and secure it. Us…
Ford Focus (2004-2011 / MK 2, Focus 2) Let's look at replacing the bulbs in the rear light of a Ford Focus. Open the tailgate to access the rear light, unscrew the securing screws on eithe…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos