Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Hydraulic Struts on a Ford Focus Boot

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Hydraulic pistons

See other generations:
Video tutorial

Open the boot of the car and observe the structure of the hydraulic struts that hold it open. Use a small flat screwdriver or any sharp tool to detach the retaining ring that connects the gas spring to the boot, then detach the strut from the lower attachment.

Clean the attachments with a suitable spray, such as WD-40. Similarly, fit the new strut by inserting it first into the lower seat and then into the boot: this operation should be done by hand, without the use of tools. Once the new strut is fitted, you can move on to replacing the other one.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Tailgate Gas Struts on Ford Focus
How to Remove the Tailgate Gas Struts on Ford Focus
Ford Focus (1998-2004 / MK 1) How do you remove the tailgate gas struts on a Ford Focus? Follow this video to replace the struts on a tailgate: Lift the tailgate and secure it. Us…
Replacing the Rear Boot Struts on a Ford Focus MK1
Replacing the Rear Boot Struts on a Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In this video, see how to remove and replace the hydraulic struts of the rear boot on a first-generation Ford Focus in simple steps. First, open the …
How to Replace the Boot Release System on a Ford Focus
How to Replace the Boot Release System on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This video will show you how to remove and replace the rear boot release system on a Ford Focus. After opening the boot, unscrew the screws that hold…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos