Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Gas Struts on Ford Focus

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Hydraulic pistons

See other generations:
Video tutorial

How do you remove the tailgate gas struts on a Ford Focus? Follow this video to replace the struts on a tailgate: Lift the tailgate and secure it. Use a screwdriver to remove the metal securing clips located at both ends of the strut. Detach the worn strut and fit the new piece into the two mounts.

Secure the strut with the metal clips. Repeat the same process for the removal/installation of the other strut.

Finally, test the strut's operation (open and close the tailgate).


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Replacing the Rear Boot Struts on a Ford Focus MK1
Replacing the Rear Boot Struts on a Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In this video, see how to remove and replace the hydraulic struts of the rear boot on a first-generation Ford Focus in simple steps. First, open the …
Replacing Hydraulic Struts on a Ford Focus Boot
Replacing Hydraulic Struts on a Ford Focus Boot
Ford Focus (2004-2011 / MK 2, Focus 2) Open the boot of the car and observe the structure of the hydraulic struts that hold it open. Use a small flat screwdriver or any sharp tool to detac…
How to disassemble the handle and switch of the rear tailgate of the Ford Focus
How to disassemble the handle and switch of the rear tailgate of the Ford Focus
Ford Focus (2011-2018 / MK 3) Below we will see the instructions that will allow us to disassemble and replace the handle and switch of the rear tailgate of the Ford Focus. First,…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos