Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the handle and switch of the rear tailgate of the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Handle

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the handle and switch of the rear tailgate of the Ford Focus. First, we open the rear tailgate and start disassembling and removing the inner lining, unscrewing all the fixing screws; then we unscrew the handle screws and disconnect the electrical connector from the inside, removing and replacing the handle with the new one. At this point, we install the new handle, checking its operation before reassembling all the elements of the rear tailgate.


Posted on 15 July 2025 by ScegliAuto


Related tutorials

How to Remove and Replace the Tailgate Panel on a Ford Focus
How to Remove and Replace the Tailgate Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This short video shows you how to remove (and possibly replace) the rear tailgate panel of your Ford Focus. This task may be useful, for example, if …
How to Replace the Boot Release System on a Ford Focus
How to Replace the Boot Release System on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This video will show you how to remove and replace the rear boot release system on a Ford Focus. After opening the boot, unscrew the screws that hold…
How to Replace the Boot Lock of the Ford Focus
How to Replace the Boot Lock of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's step-by-step instructions will show you how to remove and replace the lock of the rear tailgate of the Ford Focus. First, open the boot and b…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos