Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light on Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Tail light bulb

Open the boot lid and observe the area behind the affected light. You will notice a flap inside the boot lining that you can easily remove by hand. Behind this flap, there is a connector that you need to disconnect and two plastic clips that you must unscrew. Once done, you can pull the affected light out from the outside. With the light now free, you can place it wherever you like, for example on a workbench, and open the rear cover of the light by unfastening the three fixing clips. Finally, you can replace the burnt-out bulb and proceed with reassembly.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Ford C-Max
How to Replace the Rear Light Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the tailgate of your Ford C-Max. Begin by unclipping and removing the inner cover near the rear light. After doing this, unscre…
How to Remove the Rear Light on the Ford C-Max?
How to Remove the Rear Light on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To remove the rear light on the Ford C-Max, open the rear hatch to access the plastic cover inside the boot, corresponding to the light to be removed…
Removing the Rear Light on Ford C Max
Removing the Rear Light on Ford C Max
Ford C Max (2010-2019 / MK 2) Replace the rear light if damaged. Open the boot lid, remove the plastic cap located at the side of the boot, and unscrew the screws in the inspectio…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos