Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on Ford C Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

Replace the rear light if damaged. Open the boot lid, remove the plastic cap located at the side of the boot, and unscrew the screws in the inspection area.

Once the light is free from any constraints, detach it from the bodywork. Replace the damaged bulbs with new ones (same voltage and size as the original), inserting them into the bulb holder.

Fit the new light onto the car's bodywork. Screw in the screws inside the inspection area and connect the power terminals.

Close the boot.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Ford C-Max
How to Replace the Rear Light Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the tailgate of your Ford C-Max. Begin by unclipping and removing the inner cover near the rear light. After doing this, unscre…
How to Replace the Rear Light of the Ford C-Max
How to Replace the Rear Light of the Ford C-Max
Ford C Max (2003-2010 / MK 1) In this video tutorial, follow the instructions to remove the rear light and replace its bulbs on the Ford C-Max. First, open the boot lid and start …
How to Replace the Front Headlight Bulb on a Ford C-Max
How to Replace the Front Headlight Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the front bonnet of your Ford C-Max. Begin by unscrewing and removing the bolts that secure the headlamp to the car. Then, extr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos