Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlight Bulb on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Headlight bulb

Before starting, open the front bonnet of your Ford C-Max. Begin by unscrewing and removing the bolts that secure the headlamp to the car. Then, extract the headlamp from its housing and disconnect the rear electrical connector. This will give you access to the rear cover of the bulb, which you need to unclip and remove. Next, disconnect the socket of the blown bulb, then pull and remove the bulb itself, completing the disassembly. To install the new bulb and reassemble the headlamp, follow this procedure in reverse, and the replacement will be complete.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford C Max (2003-2010 / MK 1) Before starting, open the bonnet of your Ford C-Max. Begin by unscrewing and removing the screws that secure the front headlamp to the frame. Next, p…
Ford C Max (2010-2019 / MK 2) To replace the front headlight bulb of a Ford C-Max, open the bonnet to access the screws that secure the headlight from the top. Once these screws a…
Ford C Max (2010-2019 / MK 2) Before you can start, open the bonnet of your Ford C-Max. Begin by unscrewing and removing the screws that secure the headlamp to the vehicle. Next, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos