Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Tail light bulb

Before starting, open the tailgate of your Ford C-Max. Begin by unclipping and removing the inner cover near the rear light. After doing this, unscrew and remove the plastic screws and disconnect the electrical connector. This will free the rear light. Next, extract the rear light. At this point, unclip the retaining clips of the bulb holder, then remove the blown bulb. Once the bulb is removed, the disassembly will be complete. To fit the new bulb, follow these steps in reverse, and the replacement will be finished.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Ford C-Max?
How do you replace the rear headlight bulb of the Ford C-Max?
Ford C Max (2010-2019 / MK 2) The replacement of the rear headlight bulb on the Ford C-Max is done by opening the rear hatch, so that it is possible to access the inner trim panel…
How to Replace the Rear Light Bulb on a Ford C-Max
How to Replace the Rear Light Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) To replace the rear light bulb on a Ford C-Max, open the tailgate to access the side plastic cover in the boot. By removing this cover, you will be a…
How to Change the Rear Light and Bulb on a Ford C-Max
How to Change the Rear Light and Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Removing the rear light from your Ford C-Max is not a complicated task; with a bit of care, you can do it without too much trouble. Open the rear hat…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos