Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb on Ford C Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

Replace the rear headlamp bulb? Remove the headlamp to replace the damaged bulb on the C Max. Open the boot, and use a screwdriver to remove the cap on the side of the trim. Unscrew the securing screw and remove the rear headlamp from inside the bodywork.

Disconnect the bulb holders from the headlamp: replace the damaged bulbs with new ones (voltage and size equal to the original). Close the bulb holder in the headlamp and secure it inside the car's bodywork.

Screw in the screw and close with the trim. Turn on and check the operation of the bulbs.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Ford C-Max
How to Replace the Front Headlight Bulbs on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Learn how to replace the front headlight bulbs on a Ford C-Max: open the front bonnet by pulling the lever located at the bottom right of the dashboa…
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…
How to Remove the Headlamp on a Ford C Max
How to Remove the Headlamp on a Ford C Max
Ford C Max (2010-2019 / MK 2) Replace the front headlamp on a Ford C Max. Open the bonnet by pulling the release lever and secure it. Unscrew the securing screws above the headlam…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos