Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of the Ford C-Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

See other generations:
Video tutorial

In this video tutorial, follow the instructions to remove the rear light and replace its bulbs on the Ford C-Max. First, open the boot lid and start by removing the side plastic cover; then unscrew the plastic screw of the rear light to extract the unit from the outside (disconnecting the electrical connector of the bulbs), as shown in the video.

At this point, remove the bulb holder to access the bulbs, replacing them with new ones if necessary, and reassemble everything!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Ford C-Max
How to Replace the Rear Light Bulbs on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Below are the steps to remove and replace the rear light bulbs on a Ford C-Max. First, open the rear hatch of the boot and start removing the plastic…
How to Remove the Rear Light on the Ford C-Max?
How to Remove the Rear Light on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To remove the rear light on the Ford C-Max, open the rear hatch to access the plastic cover inside the boot, corresponding to the light to be removed…
How to Replace the Rear Light Bulb on a Ford C-Max
How to Replace the Rear Light Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the tailgate of your Ford C-Max. Begin by unclipping and removing the inner cover near the rear light. After doing this, unscre…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos