Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on the Ford C-Max?

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

To remove the rear light on the Ford C-Max, open the rear hatch to access the plastic cover inside the boot, corresponding to the light to be removed. Detach this cover to access the locking pin of the light, which must be removed along with the connector located in the same position.

Once these components are removed, you can pull the light out from its housing to replace it with a new part.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Ford C-Max
How to Replace the Rear Light Bulbs on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Below are the steps to remove and replace the rear light bulbs on a Ford C-Max. First, open the rear hatch of the boot and start removing the plastic…
Replacing the Rear Headlight Bulbs on a Ford C-Max
Replacing the Rear Headlight Bulbs on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Need to replace the rear headlight bulbs on a Ford C-Max? Watch this video to see how to do it: open the boot, remove the plastic caps located at the…
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos