Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlight Bulbs on a Ford C-Max

Model: Ford C Max MK 1 - Years 2003-2010
Part: Tail light bulb

Need to replace the rear headlight bulbs on a Ford C-Max? Watch this video to see how to do it: open the boot, remove the plastic caps located at the sides of the boot, and then remove the rear headlight by unscrewing the plastic bolts in the inspection area. Once the headlight is free from any constraints, detach it from the bodywork. Replace the damaged bulbs with new ones (same voltage and size as the original), inserting them into the bulb holder. Finally, reassemble the headlight and reverse the assembly of the other parts.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on a Ford C-Max
How to Replace the Rear Light Bulbs on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Below are the steps to remove and replace the rear light bulbs on a Ford C-Max. First, open the rear hatch of the boot and start removing the plastic…
How to Replace the Front Headlight Bulbs on a Ford C-Max
How to Replace the Front Headlight Bulbs on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Learn how to replace the front headlight bulbs on a Ford C-Max: open the front bonnet by pulling the lever located at the bottom right of the dashboa…
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos