Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light and Bulb on a Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

Removing the rear light from your Ford C-Max is not a complicated task; with a bit of care, you can do it without too much trouble. Open the rear hatch and, at the back of the light, remove the covers that conceal the bolts securing the light.

Unscrew the bolts (if too tight, use a rust remover). Once the bolts are removed, you can extract the light, remove the cover protecting the bulb holder, and take out the bulbs that you will fit into your new light.

Once all the bulbs are fitted, install the new light by placing it in the correct space and reattaching the bolts you removed earlier.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Ford C-Max
How to Replace the Rear Light Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the tailgate of your Ford C-Max. Begin by unclipping and removing the inner cover near the rear light. After doing this, unscre…
How to Replace the Front Headlight Bulbs on a Ford C Max
How to Replace the Front Headlight Bulbs on a Ford C Max
Ford C Max (2003-2010 / MK 1) How do you replace the front headlight bulbs on a Ford C Max? Follow this guide: open the bonnet of the engine compartment, remove the plastic inspec…
How to Replace the Front Headlamp Bulb on a Ford C-Max
How to Replace the Front Headlamp Bulb on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Before starting, open the bonnet of your Ford C-Max. Begin by unscrewing and removing the screws that secure the front headlamp to the frame. Next, p…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos