Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Ford Fiesta MK7

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Instrument cluster

In today's video, you will learn how to remove the instrument cluster on a Ford Fiesta MK7, following the instructions below. First, open the bonnet of your car and disconnect the battery to avoid short circuits; then, get inside the car and start by removing the lower plastic trim by pulling it towards you. At this point, unscrew the screws located underneath using a Torx screwdriver; also unscrew the screw found in the upper visor. Finally, remove the instrument cluster by disconnecting the connector at the back!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Ford Fiesta Mk7
How to Reset the Service Light on the Ford Fiesta Mk7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If you intend to manually reset the service light on your Ford Fiesta Mk7, simply follow this guide and put it into practice. First, get into the car…
How to Reset the Service Light on Ford Fiesta Mk7
How to Reset the Service Light on Ford Fiesta Mk7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In today's video, find the instructions to reset the service light for the routine oil change maintenance on a Ford Fiesta Mk7. First, get in the veh…
How to Remove the Instrument Cluster on a Ford Fiesta?
How to Remove the Instrument Cluster on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, you will see how to remove the instrument cluster on a Ford Fiesta, a very simple and quick operation. First, ensure the key is not…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos