Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Airbag on a Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Airbag

See other generations:
Video tutorial

Removing the airbag from the steering wheel of a Ford Fiesta is quite simple. To do this, rotate the steering wheel to access the two rear holes, insert a flat screwdriver, and push the internal latch that holds the airbag in place.

Once done, you will see the airbag come out of the steering wheel. If you struggle to remove it completely, unscrew the three screws that secure the plastic behind the steering wheel and remove it. Once extracted, you can unscrew the 24 mm bolt and disconnect the cables.

As you can see, this is not a complex operation and does not take much time. Good luck!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Removing the Steering Wheel Airbag from the Ford Fiesta
Removing the Steering Wheel Airbag from the Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this brief and simple guide, you will find instructions to remove the steering wheel airbag from the Ford Fiesta. First, get inside the vehicle an…
How to Remove the Airbag on a Ford Fiesta
How to Remove the Airbag on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Remove the covering plastics around the steering wheel (rear). Once the plastics are removed, unlock the securing clips of the airbag. Detach the air…
How to Remove the Steering Wheel Airbag on a Ford Fiesta
How to Remove the Steering Wheel Airbag on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) How to remove the steering wheel airbag on a Ford Fiesta? Before removing the steering wheel, disconnect the battery terminals located in the engine …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos