Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Fiesta
  6. : Ford Fiesta door panel removal

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Door panel
Operation: Ford Fiesta door panel removal

In today's video guide we will see how to remove the door panel of a Ford Fiesta. Let's open the front door first and let's equip ourselves with a plastic lever; Now remove the plastic from the grip handle, unhooking it from the rear clips: then unscrew the screws that we find below. At this point we unscrew the screw that we find near the opening handle and start to pry the sides of the panel, in several points, in order to unhook and remove it: once done, remove the cable from the handle that we find on the back and unhook the electrical connector of the window lifter!


Posted on 25 January 2024 by ScegliAuto



Ford Fiesta door panel removal
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In this video tutorial we will see the instructions on how to remove the door panel of a Ford Fiesta. First we open the front door and we go to remov
Removal of Ford Fiesta window lift button and door panel
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Today, in this video tutorial, we will see how to remove the power window control panel together with the door panel of a Ford Fiesta mk7. First we o
Ford Fiesta MK6 door panel removal
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In this video tutorial we will see how to remove the front door panel of a sixth series Ford Fiesta. First we open the front door and remove the prot

    Frequently Asked Questions

    • Fiesta 2017-2023 - How to remove the passenger side door panel in the Ford Fiesta mk7? Read Answer
    • Fiesta 2008-2017 - How to remove the door panel of a Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos