Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wing Mirror Cover on a Ford Fiesta MK3

Model: Ford Fiesta MK III, MK 3 - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Side mirror

See other generations:
Video tutorial

As shown in the video, remove the rubber stop on the front pillar of the door, at the level of the external mirror. Then, using a small flat screwdriver, remove the small round screw cover and unscrew the screw underneath.

Remove the triangular cover, then unscrew the three screws underneath and pull the mirror out of the car. For reassembly, simply reverse the process, inserting the mirror back into place, tightening the three fixing screws, and fitting the cover, which will also need to be screwed back in. As you can see, this is a task within everyone's reach.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cover of the External Wing Mirror of the Ford Fiesta
How to Replace the Cover of the External Wing Mirror of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today we will look at the instructions that will allow you to remove and replace the plastic cover of the external wing mirror of the Ford Fiesta. Fi…
How to Detach the Wing Mirror on a Ford Fiesta
How to Detach the Wing Mirror on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Learn how to detach the wing mirror on a Ford Fiesta. Using a plastic or rubber-coated lever, pry between the perimeter of the mirror frame and the m…
Replacing the External Wing Mirror of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The instructions in this guide will show you the procedure for removing and replacing the external wing mirror of the Ford Fiesta. First, open the fr…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos