Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to detach the exterior mirror mirror on Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta Fiesta 5, MK V, MK 5 - Years 2002-2008
Part: Outside rearview mirror
Operation: How to detach the exterior mirror mirror on Ford Fiesta

Let's see how to detach the exterior mirror mirror on Ford Fiesta. With a lever with a plastic or rubber coating, we go to pry between the perimeter of the mirror frame and the mirror itself; we lever until the slide comes off the mirror (disconnect the power cable); very delicate operation because the mirror or the mirror itself could break. We press on the locking clips to disconnect the mirror cover, replace the damaged piece with the new one. We hook the plastic snap clips into the mirror holders.


Posted on 13 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to remove the rearview mirror of a Ford Fista VI? Read Answer
    • Fiesta 2008-2017 - How much does it cost to replace the exterior mirror on the Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - How much does the Ford Fiesta VI exterior rear view mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos