Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exterior rearview mirror of the Ford Fiesta.

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Side mirror

Below we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the Ford Fiesta. First, let's open the front door of the car and start by removing the rubber cap located behind the mirror; then, we will unscrew the internal screws to pull the mirror out from the outside, disconnecting the electrical connector for the adjustment, as shown in the video. At this point, we will repair or replace the external rearview mirror with the new one, securing it properly; finally, all that’s left to do is adjust the angle of the glass!

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the outer mirror cap of the Ford Fiesta's side mirror
How to replace the outer mirror cap of the Ford Fiesta's side mirror
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see the instructions that will allow us to disassemble and replace the plastic cover or the cap of the external rearview mirror of the …
How to Change the External Mirror on a Ford Fiesta
How to Change the External Mirror on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to change the external rear-view mirror on a Ford Fiesta? Follow these steps. Use a plastic lever to pry between the edge of the mirror frame and…
How to Detach the Wing Mirror on a Ford Fiesta
How to Detach the Wing Mirror on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Learn how to detach the wing mirror on a Ford Fiesta. Using a plastic or rubber-coated lever, pry between the perimeter of the mirror frame and the m…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos