Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Fiesta
  6. : How do you replace the wing mirror on a Ford Fiesta?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Outside rearview mirror
Operation: How do you replace the wing mirror on a Ford Fiesta?

In order to replace the wing mirror on the Ford Fiesta, you need to loosen all the screws that hold the corresponding door panel so that it can be removed. The screws that fix it are located in the interior handle housing, on the side of the door and under the handrail moulding. Once the connectors have been disconnected, you can detach the panel and unscrew the screws that fix the rear-view mirror from the inside. Once the old mirror has been removed, it will be possible to insert the new one by assembling all the components previously removed.


Posted on 20 April 2023 by ScegliAuto



How to disassemble the wing mirror in Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this tutorial we can see how to disassemble and then replace the wing mirror in the Ford Fiesta MK6, an extremely simple and fast operation. First
How to detach the exterior mirror mirror on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Let's see how to detach the exterior mirror mirror on Ford Fiesta. With a lever with a plastic or rubber coating, we go to pry between the perimeter
Ford Fiesta rearview mirror removal
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In this video tutorial we will see how to remove the exterior rearview mirror of a Ford Fiesta. First of all we go to remove the rubber of the mirror

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to remove the rearview mirror of a Ford Fista VI? Read Answer
    • Fiesta 2008-2017 - How much does it cost to replace the exterior mirror on the Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - How much does the Ford Fiesta VI exterior rear view mirror cost? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos