Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror Cover from a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

Before you start, I recommend opening the door for greater convenience while performing the actions I will describe. So, begin by pushing down on the right side of the mirror until it is fully depressed.

This will give you access to the two clips that secure the cover. Using a flat screwdriver, press on the first clip to release it, and repeat this step for the second clip.

Once this phase is complete, to release the remaining three clips located at the bottom of the cover, you will need to tilt the cover downwards, then pull it back and lift it (do not pull too hard, as you risk breaking a clip). At this point, you will have successfully removed the cover.

If you wish to remove the other cover as well, simply repeat the steps.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Remove the Clutch Pedal from a Ford Focus
How to Remove the Clutch Pedal from a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by entering the cabin, specifically the driver's seat. Proceed to remove the carpet in the lower area of the pedal box. Next, disconnect the cl…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
How to Remove the Centre Console from a Ford Focus
How to Remove the Centre Console from a Ford Focus
Ford Focus (2011-2018 / MK 3) In this video, we will see how to remove the centre console from a Ford Focus. Use a plastic lever to pry off the cover located at the bottom of the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos