Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Clutch Pedal from a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Clutch

Start by entering the cabin, specifically the driver's seat. Proceed to remove the carpet in the lower area of the pedal box. Next, disconnect the clutch pump from the pedal. At this point, unscrew and remove the bolts that secure the pedal support to the vehicle. Once you have removed the bolts, continue by taking out the pedal along with its support from their housing. This completes the removal of the clutch pedal from a Ford Focus.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pedal on the Ford Focus
How to Replace the Clutch Pedal on the Ford Focus
Ford Focus (2011-2018 / MK 3) Follow the main instructions on how to remove and replace the clutch pedal on the Ford Focus. First, open the bonnet and begin by removing the batter…
Replacement or installation of the Ford Focus clutch pedal spring.
Replacement or installation of the Ford Focus clutch pedal spring.
Ford Focus (2004-2011 / MK 2, Focus 2) Today's main steps will show us how to replace or install the clutch pedal spring of the Ford Focus. First, we open the front driver's side door and …
How to Replace the Clutch Master Cylinder on the Ford Focus
How to Replace the Clutch Master Cylinder on the Ford Focus
Ford Focus (1998-2004 / MK 1) Today's guide will show you the main instructions on how to remove and replace the clutch master cylinder on the Ford Focus. First, open the bonnet a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos