Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door of the Ford Fiesta Mk6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: A/C controls

See other generations:
Video tutorial

This guide shows how to remove the front door of the Ford Fiesta Mk6. The first step is to disconnect the battery cables. On the side you want to work on, open the door and pull out the connector that supplies power to the door using the two clips at the end of the piece.

Use a 10 mm hex key to remove the bolt securing the door stay. With the same key, remove the four bolts securing the door to the hinges; it is advisable to start with the bolts at the bottom to avoid bending any components.

Additionally, have someone support the door at this moment. Once the door is detached from its position, you can disconnect the electrical connector.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Ford Fiesta?
How to Remove the Rear Door Panel of a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before starting, open the rear door of your Ford Fiesta. Begin by unclipping and removing the window winder by simply releasing the internal fixing c…
How to Remove the Rear Door Panel of a Ford Fiesta
How to Remove the Rear Door Panel of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before you can start, open the rear door of your Ford Fiesta. Begin by unclipping and removing the window winder by simply releasing the internal fix…
How to Remove the Rear Door Panel of a Ford Fiesta
How to Remove the Rear Door Panel of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to remove the rear door panel of a Ford Fiesta? Don't worry, let's see how to proceed. Before starting the disassembly work, disconnect the batte…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos