Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removing the exterior mirror on the Ford Focus MK2

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Outside rearview mirror
Operation: Removing the exterior mirror on the Ford Focus MK2

In this video we will see the main instructions to remove and replace the exterior mirror on the Ford Focus second series, in simple steps. First of all we open the front door and begin to disassemble the triangular cover of the mirror by levering the sides; after which we disconnect the electrical connectors that we find on the back, as shown in the video. At this point we use a T25 torx screwdriver to unscrew and remove the fixing screws of the rearview mirror; we just have to remove it from the outside and reassemble everything, applying the reverse procedure!


Posted on 13 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How much does the Ford Focus 2002 right rearview mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos