Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Light on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tire pressure warning light

In this video tutorial, you will learn how to reset the tyre pressure light on a Ford Fiesta. Before performing the operation, ensure that you have resolved any issues related to the pressure variation of one or more tyres that caused the light to turn on. First, get inside the vehicle and turn on the ignition; press the brake pedal, then switch off and on the ignition three times, as shown in the video. Press the brake pedal again and repeat the same operation: you will see the light start to flash until it turns off!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting Tyre Pressure on Ford Fiesta
Resetting Tyre Pressure on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) What to do when the tyre warning light appears? Let's reset the tyre warning light on the Ford Fiesta. Turn on the ignition with the appropriate key …
Resetting the Tyre Pressure Light on a Ford Fiesta
Resetting the Tyre Pressure Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide briefly outlines the steps needed to reset the tyre pressure light on a Ford Fiesta; before performing the reset, ensure all four tyres ar…
How to Reset the Tyre Pressure Warning Light on a Ford Fiesta
How to Reset the Tyre Pressure Warning Light on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this short and simple guide, you will learn how to reset the tyre pressure warning light on a Ford Fiesta. First, get inside the vehicle and start…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos