Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do i replace the air conditioning controls on the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: A/C controls

In order to replace the air conditioning controls of the Ford Focus you have to go and remove the panel located above the switches: under it, you will need to loosen the screws present, which will allow you to remove the radio mask. Now, you will need to lift the plastic cover that is located around the gear lever, so that you can access all the screws that secure the climate controls. By loosening the aforementioned screws and disconnecting the connectors at the rear, it will be possible to replace the air conditioner control panel and install a new spare part.

Posted on 29 December 2021 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the air conditioning controls of the Ford Focus.
Guide to replacing the air conditioning controls of the Ford Focus.
Ford Focus (2004-2011 / MK 2, Focus 2) These short and simple steps will show us how to disassemble and replace the air conditioning controls of the Ford Focus. First, we get inside the ca…
How to replace the climate control knob on Ford Focus MK1
How to replace the climate control knob on Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In today's video we will see how to remove the air conditioning controls, and how to replace the knob or selector, on a Ford Focus first series. Firs…
Disassembly of the central console of the Ford Focus.
Disassembly of the central console of the Ford Focus.
Ford Focus (2011-2018 / MK 3) Below we will see the instructions that will allow us to disassemble and replace the central console with its components of the Ford Focus. First, we…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos