Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on Ford Ka

Model: Ford Ka MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
Video tutorial

Note that the bumper fitted on the Ford Ka is very similar to that fitted on the Fiat 500, so this tutorial will be useful for drivers of both cars. It is secured to the rest of the chassis with four torx screws located behind the rear lights.

Additionally, there are two screws and one clip (per side) that secure the bumper to the wheel arch lining. Unscrew them in this order: first the screws behind the lights (open the boot lid first), then those from the wheel arch lining.

Finally, unscrew the two bolts that secure the bumper to the wheel arch itself (not the lining). Remove the bumper.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Ford Ka
How to Remove the Front Bumper of the Ford Ka
Ford Ka (1996-2008 / MK 1) Remove the front wheel before taking off the bumper. Lift the car on a jack; use a plastic or metal lever to remove the retaining clips located at th…
How to Replace the Rear Headlamp Bulb on the Ford Ka?
How to Replace the Rear Headlamp Bulb on the Ford Ka?
Ford Ka (2008-2016 / MK 2) To replace the rear headlamp bulb on the Ford Ka, open the boot lid to access the screws next to the light unit that secure it in place. Once these s…
How to Replace the Rear Light Bulb on the Ford Ka?
Ford Ka (2008-2016 / MK 2) To replace the rear light bulb on the Ford Ka, open the tailgate of the boot to access the screws next to the light. By removing these screws, you ca…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos