Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Air Vents on Ford Fiesta Mk7

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Air vents

Using two plastic levers (not metal, as this will scratch everything; one will suffice if you only have one), pry in the circular gap between the air vent and the dashboard. Carefully and gently lift and detach the vent from its housing a little at a time to avoid damaging any parts. Now that you have removed it, you can see the small clips that hold the vent in place. Observing this, you can understand that to insert the new piece you purchased, simply push the vent into place until you feel it click. Repeat the process with the other side vent.

Updated on 4 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Remove the air vents from a Ford Fiesta. Follow this guide to proceed with the removal. Use a plastic lever to detach the upper and lower trims of th…
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If you intend to manually reset the service light on your Ford Fiesta Mk7, simply follow this guide and put it into practice. First, get into the car…
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In today's video, find the instructions to reset the service light for the routine oil change maintenance on a Ford Fiesta Mk7. First, get in the veh…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to disassemble the air vents of Ford Fiesta? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos