Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Vent on Ford Fiesta

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Air vents

See other generations:
Video tutorial

Let's remove the air vent from a Ford Fiesta. Enter the vehicle, and using a plastic or metal spatula, pry upwards (levering) the plastic air vent located above the central dashboard of the car. Remove the second vent also located at the top of the dashboard.

Clean the air duct as necessary or install a new air vent. Fit the air vent back into the dashboard plastics until fully secured.

Test the operation of the air vent at the end of the installation.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents from a Ford Fiesta
How to Remove the Air Vents from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How do you remove the air vents from a Ford Fiesta? Let's see how to take the vents out from inside the dashboard. Insert a lever at the sides of the…
How to Replace the Air Vents on a Ford Fiesta
How to Replace the Air Vents on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Open the relevant door to access the air vent. Use a simple plastic lever to lift the edge of the vent, helping yourself by gripping the internal fin…
Replacing Air Vents on Ford Fiesta Mk7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Using two plastic levers (not metal, as this will scratch everything; one will suffice if you only have one), pry in the circular gap between the air…

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to disassemble the air vents of Ford Fiesta? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos