Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Serpentine Belt on a Ford F-250

Model: Ford F-250 Phn131 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: V-belt

See other generations:
Video tutorial

To replace the serpentine belt on a Ford F-250, open the hood to access the front of the engine block: this area contains the pulleys around which the belt is installed. By loosening the nuts that secure the center pins of the pulleys, you can remove them, allowing the belt to be slipped off. After removing the old belt, install the new replacement around the pulleys: then secure the pulleys in place by tightening the nuts onto the appropriate pins.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Ford F-250 (1999-2007 / Phn131) Today, you will see the main steps to remove and replace the serpentine belt or alternator belt on the first generation Ford F-250 Super Duty. First,…
Ford F-250 (2008-2010 / P356) To replace the alternator in the Ford F-250, open the hood to access the components inside the engine bay. Disconnect the terminals connected to the …
Ford F-250 (2017-2022 / P558) To replace the rear headlight in a Ford F-250, lower the tailgate to access the side screws securing the headlight. Loosen these screws to extract th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Spare Wheel on a Citroen C4 Grand Picasso

Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern!

Watch the video!


by ScegliAuto

More videos