Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror Cap on a Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Side mirror

In this video, you can see how to remove the external mirror cap on the Ford Fiesta MK7. This operation is very simple and should be done if you need to paint the part, replace it, or access the back of the mirror. All you need to do is unlock the three internal clips located on the upper side using a flathead screwdriver. Before doing this, however, you must remove the plugs from the clip holes using a hook tool as shown in the video. Once the three clips are unlocked, release the fourth clip located on the inner side, taking care not to damage it.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the outer mirror cap of the Ford Fiesta's side mirror
How to replace the outer mirror cap of the Ford Fiesta's side mirror
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see the instructions that will allow us to disassemble and replace the plastic cover or the cap of the external rearview mirror of the …
How to Change the External Mirror on a Ford Fiesta
How to Change the External Mirror on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to change the external rear-view mirror on a Ford Fiesta? Follow these steps. Use a plastic lever to pry between the edge of the mirror frame and…
How to Detach the Wing Mirror on a Ford Fiesta
How to Detach the Wing Mirror on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Learn how to detach the wing mirror on a Ford Fiesta. Using a plastic or rubber-coated lever, pry between the perimeter of the mirror frame and the m…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos