Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from the Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Car stereo

In this video tutorial, learn how to remove and replace the factory radio from the Ford Fiesta by following the instructions below. First, get inside the vehicle and start by removing the side panel of the radio, prying it off from the sides and disconnecting the electrical connectors at the back. Then, remove the plastic of the central instrument panel by disconnecting the various wiring, as shown in the video. At this point, unscrew the screws of the radio using a cross screwdriver; extract the radio and replace it, if necessary, with a new one!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Original Stereo on Ford Fiesta
How to Remove the Original Stereo on Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How to remove the original stereo from your Ford Fiesta? Follow these guidelines carefully in the video. Use the original or aftermarket metal keys t…
Replacing the Standard Radio in the Ford Fiesta
Replacing the Standard Radio in the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Below are the instructions to remove and replace the standard radio in the Ford Fiesta, following these simple and quick steps. First, get inside the…
How to Remove the Original Radio from a Ford Fiesta
How to Remove the Original Radio from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Follow these steps to remove the radio from a Fiesta and how to replace it. First, remove the plastic trim around the centre console (original or gen…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos