Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to remove the rear light in the Ford Fiesta?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Tail light
Operation: How to remove the rear light in the Ford Fiesta?

In this tutorial we can see how to remove the rear light in the Ford Fiesta, a very simple and fast operation. First of all, let's make sure that the key is not inserted, then open the tailgate and move the carpet to the back of the headlight to be removed. Next, we unscrew the plastic fixing bolt, extract the headlight from the body by pulling it towards us and disconnect the connector. In the event that we need to replace a bulb, we can extract it from the housing by turning the bulb holder counterclockwise. We follow the reverse procedure to put everything back together.


Posted on 28 April 2024 by ScegliAuto



Disassembly of the rear light of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Through this very short video tutorial today, you will be able to see the entire necessary procedure step by step to disassemble the rear light of a
Ford Fiesta rear light removal
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In today's video tutorial we will see how to remove the rear light of a Ford Fiesta, in simple steps. First we open the boot lid and with a torx scre
Removing the rear light of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Removing the rear light of a Ford Fiesta? Let's see in this video how to remove the right rear light. We open the boot lid, lift the upholstery cloth

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to replace the left rear light of the Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos