Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : How to replace the air filter in the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Air filter
Operation: How to replace the air filter in the Ford Focus?

Replacing the air filter in the Ford Focus is an extremely simple operation and within the reach of anyone, we need an 8mm wrench and obviously the replacement filter. We open the hood and locate the filter, it is located on the driver's side as shown in the video. Then remove the 4 8mm nuts from the box and open it. To remove the filter from the manifold, simply hold it and pull it outwards. Then insert the new filter taking care to have removed all the dirt inside the box, reinsert the cover and tighten the 4 nuts.


Posted on 4 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the Ford Focus III engine air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos