Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the cabin filter of the Ford Focus 2004.

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Cabin air filter
Operation: How to replace the cabin filter of the Ford Focus 2004.

If the cabin air filter of your second generation Ford Focus (year 2004) is excessively worn and compromises the quality of the air breathed when the air conditioning is in operation, then all you have to do is carefully read the following guide and put into practice what is described. First of all, safely park the car and completely turn it off. Then lift the front hood and locate the plastic panel located at the top of the engine compartment. Remove it with your own hands and, finally, replace the old air filter with the new one.


Posted on 12 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the cabin filter on the Ford Focus located? Read Answer
    • Focus 2004-2011 - Where is the cabin air filter located on the Ford Focus MK2? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus pollen filter located? Read Answer
    • Focus 2018-2025 - Where is the cabin filter located on my 2019 Ford Focus? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus 1.6 cabin air filter located? Read Answer
    • Focus 1998-2004 - Where is the air conditioning cabin filter Ford Focus 3rd series Read Answer
    • Focus 1998-2004 - Where is the cabin filter of the Ford Focus I? Read Answer
    • Focus 2004-2011 - Where do you find the Ford Focus II cabin air filter? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos